HHO Kits – Fuel Saver Technology
Posted by in Fuel saver on October 18, 2011
Use HHO Kits to save money and environment
HHO kits are the systems for your car that converts water into HHO gas and adds it to the combustion process of the engine that way improving gasoline combustion for up to 50%, keeping the engine cooler and reducing carbon monoxide and carbon dioxide emissions from the engine. There are many people who say that you can`t run your car on water and they are partially right. It is true, you can`t run your car solely on water but you can make a HYBRID car out of it.
By installing a HHO kit you can improve your car fuel efficiency by as much as 50%, depending on which system you are using. So, the rumors are right, you can`t run your car on water but you can still reduce your monthly gasoline costs by up to 50%! And think about what you would be doing for the environment and for yourself! HHO kits can reduce negative emissions by up to 60%. If every fifth car in the world was a HHO Hybrid the emissions levels would drop for the same amount as if 25 million cars were dumped from the planet. Our fuel consumption would drop for up to 30% reducing dependency on foreign oil and lowering gasoline prices. Only about 20% of gasoline is combusted properly and 80% is usually wasted. By installing a HHO kit in your car you improve gasoline combustion that way reducing fuel consumption. Your engine will no longer need the same amount of fuel for proper combustion and desired power output. With HHO kit your engine will produce the same amount of power using up to 50% less gasoline than before! This will improve you mpg and mileage and reduce number of visits to the gas station.
HHO kit is very easy to install
It is made of a water container, some metal plates used for electrolysis process, some tubing and some wiring. It can be made in many variations depending on your creativity and skill and it can be fitted almost anywhere you want. Parts for a HHO kit can be found at a local tool shop or even in your garage. They usually don’t cost more than fifty bucks so don’t be scared by people who say it is much more expensive, they just have the wrong opinion that good quality products have to cost a lot in order to work. Actually, it is quite opposite, the best things are usually free or very cheap. If you have some skills and know a little about electronics and car engines you can easily build and install your own HHO kit by yourself. But if you are not that confident in yourself you can always take it to your local mechanic to build it and install it for you or just assist you in the process. It usually shouldn’t take more than half an hour to do it unless you have something very special and demanding on your mind.
HHO kit can be fitted on almost every car model of any make
It fits in any car because it is based on simple principles that work in almost any condition. The finished product is about the size of a small box or a jar depending on which style you prefer. It can be made specifically for your car for maximum space exploitation and compact fitting. The size of the HHO kit depends on your engine model, water reservoir volume and outer housing if you chose to use one. And if you somehow don’t like the results you are getting, the installation process is completely reversible and easy to do. So if you want to start saving gasoline, increase mpg and mileage, keep your engine cooler and smooth running, help save our environment and improve your living the HHO kit is the right thing for you, either you chose to build it yourself or have a mechanic do the work for you. Read the rest of this entry »
Water Flow Meter – Different Types and Its Benefits
Posted by in Water flow meter on October 18, 2011
The constant growth of science and technology has led to the consequent inventions of different types of measuring instruments which include water, air and gas flow meter. It is tools which are used for measuring the flow of liquid, gas or air.
Water flow meter is used to measure the amount of water consumed and it is used for domestic and industrial purposes. There are visually many benefits of using it. In addition to obtaining an accurate measurement of the amount of water used in homes, industries and public places, it is also beneficial in identifying water leaks. Thus it helps to conserve water and prevents water shortages.
The Various Types of Flow Meters
There are basically two types of it for measuring the amount of water used. The positive displacement meter and the velocity water flow meter. The positive displacement meters are found in most of the homes and apartments as it measures low flow accurately.
In these meters, the mechanism involves measuring of the flow in comparison to the previous volume of water which is held in the chamber. The total number of times this particular chamber is filled and emptied account for the amount of water used.
In the velocity water flow meter, the volume of water used is calculated by the velocity of the flow. These meters use various mechanisms to calculate the volume of water by measuring the velocity.
Some of the common velocity meters include the magnetic meters, turbine meters, orifice meters, ultrasonic meters, multi jet meters and the venture meters. The velocity meters are appropriate for measuring huge volumes of water and are therefore used in huge industries which utilise large volumes of water.
It is available in huge varieties though most of them are based on the two mechanisms mentioned above. Some of it can even measure the smallest trickle of water and thereby provide accurate measurements for billing purposes.
Among the different varieties include the digital water meter which measures the volume of water used in cubic meters or feet. It is installed in most of the homes, apartments and offices as it is perceived to be more accurate. It is quite easy to install and have a number of attractive features.
The water flow meter is also beneficial in increasing the power of water supply to the source with less power consumption. It is also manufactured with additional features such as ability to withstand different types of weather, rust and scratch.
There are a number of Indian exporters who supply a huge variety of it such as electronic, temperature, pressure, industrial and digital flow meter. Read the rest of this entry »
Epoxy or Polyurethane Crack Injection – What’s Best?
Posted by in Injection on October 18, 2011
The Basic Characteristics of Epoxy and Polyurethane
Epoxy and polyurethane are both resins; generally, they are two component formulations. The blending of the components for each resin type creates the material with the requisite properties for crack repairs.
Epoxy’s components are a resin and a hardener; blended together before a crack injection. The mix ratio is typically two parts epoxy to one part hardener. Injection epoxies typically cure within three to four hours. Once cured, epoxy has a strong bond and a hard plastic-like texture.
Polyurethane, while not necessarily a two component blend, typically has two; one is the resin and the other is an accelerator. Unlike epoxy, the texture of cured polyurethane varies significantly; one cannot generalize regarding the properties of cured polyurethane.
Differences in The Epoxy and Polyurethane Crack Injection Processes
There are significant differences in how polyurethane and epoxy crack injections are carried out. Epoxy injections are referred to as “Surface port injections” because they involve the use of injection T-Ports to inject the epoxy into a crack.
Polyurethane injection involves much higher injection pressures using packers inserted into drilled holes through the crack in the poured concrete foundation. Like epoxy, the injected polyurethane fills the crack through the entire thickness of the foundation thereby preventing water from entering the crack. Professional polyurethane crack injections typically involve a flushing process to clean the crack to improve adhesion within the crack.
Advantages of Epoxy Crack Injection
1. The tensile strength of cured epoxy is greater than that of poured concrete. Under tension, cured epoxy crack repairs will not yield.
2. Epoxy injections provide positive confirmation to the injection technician that the crack has been completely filled.
3. Epoxy crack injections are extremely reliable due to their low failure rate.
4. Epoxy’s curing time allows the epoxy to gravity feed within the crack, thereby filling all parts of even the finest cracks.
Advantages of Polyurethane Crack Injection
1. Polyurethane can be used regardless of the crack condition and the weather. It doesn’t matter if the crack is actively leaking, full of mud and/or mineral deposits, or if it is small or large.
2. Polyurethane injection involves a crack flushing process that cleans out the crack prior to the injection.
3. The chemical expansion of the polyurethane will fill voids within the concrete.
4. The rapid curing of polyurethane is beneficial when rapid waterstopping is required. Read the rest of this entry »